Polysorb for newborns and infants: instructions for use

Managing a variety of health issues is a common challenge faced by parents when caring for newborns and infants. Digestional discomfort is a common concern that can cause distress to both parents and babies. It is occasionally advised to take the well-known drug Polysorb to help with these problems.

One kind of sorbent that functions by binding and eliminating noxious materials from the digestive tract is called polysorb. It is especially helpful for treating issues that can affect babies’ digestive systems, such as gas, bloating, and other disturbances. The comfort and wellbeing of your baby can significantly improve if you know how to use Polysorb correctly.

You will learn all the important information about using Polysorb for newborns and infants from this article. We’ll go over how it works, how much is right, and some crucial safety advice to make sure you use it wisely and safely. You can provide your child relief from uncomfortable digestive problems by adhering to these guidelines.

Release form and composition

The sole version of "Polysorb" is an oral suspension made from powder and liquid. Such powder is odorless and is white, occasionally tinted blue. It is offered for sale in three-gram portioned bags or in plastic jars holding fifteen to fifty grams of medication.

Silicon dioxide in a colloidal form is its sole component. Since there are no other substances in the bag or jar, the dosage of this compound matches the amount of powder in the purchased package. "Polysorb MP" is not made available in the form of tablets, pastes, capsules, or other forms.

Operating principle

The foundation of the powder is an inorganic substance with strong sorption capabilities. It binds a wide range of substances that have either formed inside the body or entered it from the outside. This is known as its non-specific action. Simultaneously, silicon dioxide does not experience any physiological alterations and cannot be absorbed in the intestines; instead, it is eliminated through the feces and carries toxic substances with it.

• pathogenic microbes that provoked an intestinal infection;
• excess bilirubin, creatinine, cholesterol and other compounds;
• medicines, including in case of their overdose;
• allergens from food;
• viruses and fungi that cause diarrhea and other signs of an intestinal infection;
• toxins produced by bacteria that have entered the digestive tract;
• ethyl alcohol, heavy metals and other toxic substances;
• compounds that appear in the body due to intoxication.

Is it prescribed to newborns and infants?

Children of any age can use Polysorb; there are no age restrictions. Even recently delivered babies and infants under a year old are prescribed this sorbent. Since the drug has no effect on the child the mother is breastfeeding, it is not forbidden during this time.

Nevertheless, there are a few requirements that must be met in order to use this powder at a young age:

• the drug can only be given after a doctor"s examination, since there are some contraindications for it that are difficult for parents to assess without a specialist;
• in infants, the drug is used episodically so as not to affect the absorption of useful nutrients and not to worsen the composition of the microflora.

Indications

In these situations, "Polysorb" is in demand for treating children younger than one year old:

• if the child has any intoxication, the signs of which are vomiting, fever, diarrhea and other symptoms;
• if the baby has been diagnosed with dysbacteriosis;
• if the baby has been infected with viruses or pathogenic bacteria (not only with intestinal infections, but also with flu and other diseases);
• if the level of bilirubin in the blood of a newborn baby is very high or jaundice does not go away for a long time;
• if the baby has been poisoned by any toxic substance, for example, a medicine in an accidentally exceeded dose or ethyl alcohol;
• if any allergic reaction has been diagnosed, as well as with diathesis and an increased risk of allergies;
• if the baby has a kidney disease in which the function of this organ is severely impaired.

Contraindications

We emphasize again that a doctor’s examination is required prior to treating an infant. Patients who are hypersensitive to this drug or who suffer from serious gastrointestinal diseases (bleeding, atony, etc.) should not take "Polysorb."

For the safe and efficient removal of toxins, allergens, and hazardous substances from the body, use polysorb on newborns and infants. It is frequently used to treat food poisoning, allergies, and digestive problems like colic. A dosage determined by the baby’s weight is administered after the powder and water are combined. To prevent any negative effects, parents should closely adhere to the instructions. They should also always see a pediatrician before beginning treatment to make sure it is suitable for their child’s particular condition.

Side effects

Some infants who use the powder experience allergy symptoms afterwards. Sometimes, children who take Polysorb may also experience constipation. In this instance, the medication needs to be stopped right away and switched out for an analog that the baby’s body will respond to appropriately after speaking with a doctor.

Instructions for use

The required quantity of powder must be carefully collected after opening the Polysorb package (the mass is amorphous and readily rises into the air), and it should then be diluted with regular water. It is acceptable to dilute medication given to a newborn with breast milk or a suitable substitute. To encourage the little patient to take the medication more voluntarily, you can mix the powder with juice or compote for babies who have already tried complementary foods.

The baby’s feeding schedule and the medication’s timing should be in sync. An infant should take polysorb an hour and a half after feeding, or an hour before. Infants are given such sorbents during meals if they are prescribed for atopic dermatitis and other food allergy symptoms.

Polysorb is typically administered three times per day, and the child’s weight must be determined in order to determine the one-time dosage. Every dosage results in the gain of 0.5 teaspoon of powder if the baby weighs less than ten kilograms. A single serving of Polysorba for peanuts weighing more than 10 kg is a full spoonful recruited without a hill. A single dosage of medication is diluted using 30 to 50 milliliters of liquid; the manufacturer suggests using this amount for children under 20 kg in weight. This is mentioned in the instructions’ table.

Since the cause of the powder and the child’s body’s reaction to the treatment both affect it, the length of each child’s polysorbus treatment is decided individually. Often, the baby is only given the medication for a few days if it was prescribed for intoxication or digestive problems. The doctor may prescribe Polysorb for longer periods of time in the event of serious pathologies (kidney diseases, infections, allergies), but these usually don’t last longer than two weeks in order to avoid unfavorable reactions.

Overdose

"Polysorb" is thought to be safe, and no powder overdose incidents have been reported to date. In theory, a child may experience an allergic reaction or constipation if they unintentionally take too much of this medication. You should get in touch with your doctor in such a circumstance.

Interaction with other drugs

Like other sorbents, "Polysorb" should not be used in conjunction with any medications in order to prevent worsening of their absorption and therapeutic effects. Between taking the powder and other medications, there should be a minimum of one hour’s rest.

Terms of sale and storage

Since "Polysorb MP" is an over-the-counter medication, purchasing it from a pharmacy presents no challenges. However, without a doctor’s prescription, you should not purchase it for a newborn. The amount of powder in the package determines its price. For instance, a jar holding fifty grams of the product will set you back approximately 350 rubles, and a packet containing three grams of the medication will cost you between 40 and 80 rubles in various pharmacies.

The medication can be kept at room temperature in your home, but the jar needs to be tightly closed. The drug, when undiluted, has a five-year shelf life. The suspension can be kept for up to 48 hours after being diluted with liquid, but it is recommended that children have a fresh dilution for every dose after that.

Reviews

Reviews of Polysorb’s use in babies are largely positive. They attest to the sorbent’s efficacy in treating a variety of conditions, including dysbacteriosis, colic, diarrhea, dermatitis, and jaundice.

One of the drug’s main drawbacks is that it doesn’t taste very good, which makes giving it to a baby challenging.

For newborns and infants with digestive problems, Polysorb can be a useful tool in managing the discomfort caused by gas or minor disturbances in the digestive system. However, using it should be done so carefully and under a pediatrician’s supervision. The key to safely introducing Polysorb into your baby’s care regimen is to make sure the dosage is right and to keep an eye on their reaction.

Never forget that, even though Polysorb can help, it can’t replace a healthy diet or qualified medical advice. It is imperative that you speak with your healthcare provider if your baby exhibits severe or persistent symptoms. Under their direction, you can be sure your child will get the best care possible, customized to meet their individual needs.

You can use Polysorb safely and effectively if you adhere to the recommended guidelines and keep yourself informed about your baby’s medical condition. The most important things are your baby’s comfort and well-being, which can be attained with a cautious, knowledgeable approach.

Video on the topic

#Polysorb

Poisoning. Polysorb (Atoxil) for poisoning.

Allergy. Polysorb (Atoxil) for allergies.

Elena Malysheva told the whole truth about Polysorb!

Polysorb instructions! Body cleansing! How to take?

Polysorb powder instructions for use of the drug: Indications, how to dilute, application

Polysorb, instructions 2